CLEANING OTHER PARTS OF YOUR APPLIANCE
BURNER:
At least twice a year, clean your burner when cleaning the venturi tubes. The burner can
be gently scraped clean with a brass bristle brush. Ensure that all burner ports (openings)
are clear
(DO NOT ENLARGE BURNER PORTS)
. If you find cracks, abnormal holes, or
damage caused by corrosion during your inspection and cleaning, replace burner with a
FIESTA BURNER ONLY. (SEE WARRANTY).
IGNITOR:
Clean the ignitor clip lightly using a wire brush to remove rust and grease.
DO NOT USE
WATER OR CLEAN THE ELECTRODE WITH THE WIRE BRUSH.
Visually inspect the
ceramic of the electrode for cracks. The electrode can be wiped with a soft cloth if
necessary. If a crack is found, a replacement ignitor system will be required, look for
Fiesta O.E.M. ignition system or universal ignition system.
CLEANING GRIDS:
After each use, scrub the cooking grids with a stiff long-handled brass brush. Do not use
steel brushes, as they can scratch the nickel or porcelain coating. Grids can also be
washed with mild detergent. Never use commercial oven cleaners. If rust appears on your
cooking grids, remove the rust with a scrub pad and coat the grid with some cooking oil.
If excessive wear is evident, you might want to replace or upgrade your cooking grid.
Call our info Fiesta experts for more details at 1-800-396-3838.
COOKING SYSTEM:
All cooking systems such as Lava Rocks, Ceramic Briquettes and Ceramic Grates are self-
cleaning. When the grill is cold, turn each item over and then turn the grill on HIGH for 10
to 15 minutes.
DO NOT LEAVE THE GRILL UNATTENDED.
Replace or possibly upgrade
your cooking system when they begin to spread apart or fall through the grate. With
Smart Bars or Heat Distribution Plates, scrape them with a brass bristle brush; clean
using soap and water, then rinse and dry.
DO NOT ALLOW EXCESSIVE GREASE OR
OTHER RESIDUE TO BUILD UP ON YOUR COOKING SYSTEM AS A FIRE MAY RESULT.
SIDE SHELVES:
Wood, Metal or Resin Shelves: Use any household cleaner, except those containing acid
or mineral spirits. Be sure to rinse well after cleaning.
DO NOT USE AS A CUTTING BOARD
.
Plastic Shelf Inserts: Clean with dishwashing liquid, then wipe dry.
DO NOT USE AS A CUTTING BOARD.
MDF Inserts (Medium Density Fibre Board): Clean with mild detergent and a lightly
moistened cloth, then wipe dry. Keep away from excessive moisture.
DO NOT USE AS A
CUTTING BOARD
.
Stainless Steel Insert: Do wash regularly with warm water and a mild soap or detergent
using a clean cloth or soft brush, rinse thoroughly and wipe dry.
(DO NOT USE STEEL
WOOL OR OTHER METAL SCRAPERS TO REMOVE STUBBORN DIRT)
. Always clean in
the direction of the original polish lines. Do Not Allow Dirt to Accumulate.
11
