FLSC GB
174
Betriebsanleitung
•
73734 Esslingen - Fiessler Elektronik - Kastellstr.9
•
Doku Nr. 625 R.H.
Note for the operator
The instructions concerning daily inspection are also provided in the form of a self-adhesive
sign. Please affix this sign in an easily readable location near the safety device in order to
facilitate the daily inspection procedure.
6.2 Checklist
The data for the points listed below must be present by the time of first commissioning at the
latest - although this depends on the application, the requirements of which must be checked
by the manufacturer/equipment provider.
This checklist should be preserved or filed with the machine documentation so that it can be used for
reference for the routine tests.
1.
Are the safety regulations based on the directives/ standards applicable to the machinery?
Yes
❏
No
❏
2. Are the applied directives and standards listed in the
Declaration of Conformity?
Yes
❏
No
❏
3.
Does the safety device comply with the required control category?
Yes
❏
No
❏
4. Is entrance / access to the danger area / zone only possible through the protective field of the
NCSD alone?
Yes
❏
No
❏
5. Have measures been taken to prevent unprotected access to a protected danger area (mechanical
point-of-operation guarding) and to monitor this eventuality, and are these measures safeguarded
to prevent their removal?
Yes
❏
No
❏
6. Are additional mechanical safety devices installed to prevent access above, beneath and around
the protected area, and are these secure against manipulation?
Yes
❏
No
❏
7. Has the maximum stopping or run-on time of the machinery been checked and is it indicated (on
the machine and/or in the machine documents) and documented?
Yes
❏
No
❏
8. Is the required safety distance maintained between the NCSD and the nearest danger area?
Yes
❏
No
❏
9. Are the NCSD devices properly mounted and secured against displacement after adjustment?
Yes
❏
No
❏
10. Are the required safety measures to prevent electric shock effective (protection class)?
Yes
❏
No
❏
11.
Is the command unit for resetting the (NCSD) safety device or for restarting the machine present
and properly installed?
