1
1-34
Installing User Software on a Windows Computer
Setting up SMB printing on Windows NT 4.0 or Windows 2000/XP
SMB printing (also known as Windows printing) allows you to install the PostScript
printer driver and printer description files, and print from your computer to a
particular print connection (Hold, Print, or Direct) on the Fiery. These instructions
assume you have installed the TCP/IP protocol and Client for Microsoft Networks.
Each connection (Hold, Print, or Direct) requires a new printer driver and printer
description file. To set up printing to a second or third print connection, repeat the
procedure
“To set up SMB printing on Windows NT 4.0 or Windows 2000/XP”
page 1-35. If you install more than one printer, give each a descriptive name during
printer driver installation, such as
Aero-Print
or
Aero-Hold
, so you can easily identify
printers.
N
OTE
:
To change printer defaults and configure installable options from Windows
NT 4.0, you must log on as Administrator and use the password specified in Fiery
Setup. If you log on as a User, you can install the printer driver through Point and
Print, but you can not modify printer defaults and configure installable options.
N
OTE
:
With Windows 2000/XP, you cannot install the driver and configure the
printing connection to the Fiery in a single procedure. The printer driver must be
installed from the User Software CD.
B
EFORE
YOU
BEGIN
•
Configure the Fiery for SMB printing in Network Setup>Service Setup>
Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map,
and on the Configuration page. For more information, see the
