manualshive.com logo in svg

FieldServer FS-8700-74, Driver Manual

Share
Download
FieldServer FS-8700-74 Driver Manual Download Page 24

FS-8700-74 Veeder Root Driver Manual 

 

 

 

 

 

Page 24 of 33

 

FieldServer Technologies

 1991 Tarob Court Milpitas, California 95035 USA  

Web

:www.fieldserver.com 

Tel

: (408) 262-2299   

Fax

: (408) 262-9042   

Toll_Free

: 888-509-1970   

email

: [email protected] 

Error 

Action Required 

Md= <%s>

§

 

*VROOT:#24 Err. 
Function=%x not supported. 
Md= <%s>

§

 

Check the data type’s spelling spacing and punctuation. If this is 
correct and you have specified the Veed_Function parameter in 
the Map Descriptor then check that the function is supported by 
the driver (Table 6.1) and check that you specified it correctly. 
The functions numbers in table 6.1 are hexadecimal numbers. 
Either convert them to decimal or specify them in the CSV file 
using the notation 0xnnn where nnn is the function number. 

VROOT:#25 FYI. 
Node=<%s> No password. 
Is security disabled on 
panel? 

This message may be safely ignored. It does not indicate an 
error. This message is printed once for each node which does not 
have a password. This message provides confirmation that your 
configuration is not using a password and suggests that you 
check the panel configuration for the corresponding node to 
ensure that the security feature has been disabled. Additional 
information is provided in Appendix A.4 

VROOT:#26 FYI. 
Node=<%s> 
Password=<%s>. Is 
security enabled on panel? 

This message may be safely ignored. It does not indicate an 
error. This message is printed once for each node which does 
have a password configured in the CSV file. This message 
provides confirmation that your configuration is using a password 
and suggests that you check the panel configuration for the 
corresponding node to ensure that the security feature has been 
enabled. Additional information is provided in Appendix A.4

 

 

Appendix B.1.  Driver Stats 

In addition to the standard FieldServer communication statistics described in the FieldServer 
User’s Manual Veeder-Root Driver can also expose some driver statistics by writing data to 
a Data Array.  A special Map Descriptor named “vroot-stats” is required.   
 
The following example shows how this special Map Descriptor can be configured. You can 
copy this section of text directly into your CSV file. 

 

Nodes 

 

 

 

 

Node_name, 

Protocol 

 

 

 

null_node   , 

VRoot 

 

 

 

 

 

 

 

 

Data_Arrays, 

 

 

 

 

Data_Array_Name, 

Data_Format, 

Data_Array_Length 

 

 

VROOT_STATS  , 

UINT32        , 

 1000 

 

 

 

 

 

 

 

Map_Descriptors, 

 

 

 

 

Map_Descriptor_Name, 

Data_Array_Name, 

Node_name, 

Length, 

Data_Type 

VRoot-stats          , 

VROOT_STATS  , 

null_node    , 

1000  , 

Stats 

  

When the driver sees this Map Descriptor it uses the Data Array VROOT _STATS (in this 
example) to store driver specific statistics.  Only one of these Map Descriptors may be 
specified per FieldServer. 

                                                                                                                                                          

§

 

This is a configuration error which can be eliminated by correcting an error in the CSV file and resetting 

the FieldServer.

   

Summary of Contents for FS-8700-74


































Reviews:

No comments

Brands by name

Popular brands

Load more brands