25
24
Wireless Receiver Mode
Use your SC460 to wirelessly receive live
measurements from Fieldpiece wireless tools from
anywhere on the jobsite. For example, receive an
evaporator delta T measurement to your SC460
while you work at the condenser outdoor unit.
Receiving Wireless Measurements
1 Select RECV ( ) switch position on SC460.
2 Press SYNC button for 1 second until meter beeps.
Signal strength bars indicate wireless search.
3 Hold SYNC button for 1 second on the Fieldpiece
wireless transmitter.
4 The wireless measurement, signal strength, and
battery life of the wireless transmitter will display in
the top-right corner of the SC460 screen.
Note: If a Fieldpiece wireless transmitter is not
connected within 2 min, the SC460 will beep and
stop searching.
Wireless Auto-Connection
When powered on, SC460 will search for the last connected single-link
wireless partner. If found, SC460 will automatically reconnect. If not
found, wireless will stop searching after 2 minutes and an audible beep
will sound.
Log Measurements in Job Link™
Keep your hands free to focus on the job. Press the HOLD button on
your clamp meter to log measurements within Job Link mobile app.
Wireless Transmitter Mode
The SC460 is Fieldpiece Job Link™ compatible*.
Send electrical measurements wirelessly from
SC460 to the Job Link™ mobile app via the JL2
Transmitter .
Sending Wireless Measurements
1 Select any switch position other than RECV ( ) on
SC460.
2 Press SYNC button for 1 second until meter beeps.
Signal strength bars indicate wireless search.
3 Hold SYNC button for 1 second on the Fieldpiece
JL2 Job Link™ Transmitter.
4 Follow instructions for Job Link™ mobile app.
Wireless Specifications
Wireless range:
Up to 75 feet (23m) line of sight
Minimum wireless distance:
1 foot (30cm)
Wireless frequency:
910MHz to 920MHz (US), 868.1MHz to 868.5MHz
(European)
Wireless Compatibility
For Receiving Wireless Measurements:
EH4W, ET2W, LT17AW, SC57,
SC660, SC460
For Sending Wireless Measurements:
JL2 Job Link™ Transmitter,
SC460 or SC660.
Job Link Note: Some electrical parameters may take up to 30 seconds
to be visible within the Job Link Live measurements screen on your
mobile device.
