Fieldmann FZS 70705-0, User Manual

Page: 14 / 116

EN 14
FZS 70705-0
Description of the machine
4. DESCRIPTION OF THE MACHINE
(see picture on page 3)
1. Right handle
2. Lock-off button
3. Trigger
4. Right
shaft
5. Safety guard
6. Trimmer head
7. Line
8. Line
cutter
9. Battery pack (not included)
10. Battery pack pins
11. Upper shaft
12. Shoulder strap ring
13. Shoulder strap
14. Left shaft
15. Clamp Knob
16. Clamp
17. Left handle
18. Lower shaft
19. 3-teeth blade
20. Blade nut cover
21. Locking Nut
22. Hex wrench
23. Shaft lock rod
24. Screw
25. Charger (not included)
26. Allen wrench
5. ASSEMBLY
WARNING: Never operate the tool without the safety guard fi rmly in place. The guard must always be on
the tool to protect the user.
WARNING: When the tool is equipped with a trimmer head, the line cutter should be mounted onto the
safety guard. Failure to comply will result in overly long cutting line and overload the motor. Never use the
trimmer head without guard accessory.
WARNING: If any parts are damaged or missing, do not operate the brush cutter until the parts are
replaced. Use of the brush cutter with damaged or missing parts could result in serious personal injury.
WARNING: Do not attempt to modify the brush cutter or create accessories not recommended for use
with this product. Any such alteration or modifi cation is misuse and could result in a hazardous condition
leading to possibly serious personal injury.
WARNING: Always wear heavy gloves when installing or removing the guard and doing any
maintenance on the 3-teeth blade/line-cutting blade. Be careful of the line-cutting blade on the guard accessory
/3-teeth blade for protecting your hands from being injured by both the blades.
WARNING: To prevent accidental starting that could cause serious personal injury, always remove the
battery pack from the tool when assembling parts or transporting the machine.
WARNING: Never operate the tool without the guard and handles fi rmly in place. Failure to comply could
result in possible serious personal injury.
1. MOUNTING THE LEFT AND RIGHT SHAFT
Loosen the four wing bolts fi rst by allen wrench(26 ), insert the right shaft with button and left shaft into the
connecting joint. (See Fig. A1)