background image

EN

28

FZP 45016-B

 Technical Parameters | Disposal

15. TECHNICAL PARAMETERS 

Engine displacement (cc)

45 (1,75 kw)

Fuel tank capacity (L)

0.55

Oil tank capacity (L)

0.24

Oil feeding system

Automatic

Chain type

chinese

Pitch

0.325“

Gauge

0.058“

Guide bar size

16“

 If you fi nd that the vibrations being transferred to the handle have become noticeably worse compared to the 
condition when the chain saw was new, check the wear on the silentblocks (rubber coated mounting elements) 
and if necessary contact an authorised service centre to have them replaced.

   

ATTENTION!

 Working with a chain saw with an incorrectly working vibration shock absorption system may 

lead to health problems. 

16. DISPOSAL

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING 
MATERIALS

Dispose of used packaging material at a site designated for waste in your municipality.

The machine and its accessories are manufactured from various materials, e.g. metal and 
plastic. 
Take damaged parts to a recycling centre. Inquire at the relevant government department.

This product meets all the basic requirements of EU directives that apply to it.

Changes in the text, design and technical specifi cations may be made without prior notice and we reserve 
the right to make these changes.

User s manual in the original language.

Summary of Contents for FZP 45016-B




































Reviews: