EN
12
FZN 5101 A
Putting into operation
|
Replacing the blades
6. PUTTING INTO OPERATION
IMPORTANT
: This is a power tool that is very easy and comfortable to use. Please pay special attention to
the position of the blades during work with this tool so that you avoid injury.
Using the tool (Fig 3)
ATTENTION!
Never remove or interfere with
the function of the starting mechanism. The start
safety lock prevents your tool from being started
accidentally.
Starting the shears
1. Press the trigger safety lock (Fig 3, point 1)
and then press the start/stop trigger
(Fig 3, point 2).
2. Release the trigger safety lock (Fig 3, point 1).
Turning off the shears
Release the start/stop trigger (Fig 3, point 2).
Fig. 3
1
2
Setting the handle inclination
1. Press the button on the handle (Fig 4, point 1).
2. Set the desired inclination of the handle.
3. When the button is released, the handle is fi xed.
Fig. 4
1
7. REPLACING THE BLADES
ATTENTION!
Sharp blades may cause injuries, replace only when wearing gloves.
ATTENTION!
When replacing the blade, remove the battery from the tool.
1. Press the safety locks on the blade according to Fig 5, point 1.
2. Drag the blade in the direction of the arrow to remove it.
3. Attach the second blade as shown in Fig 6 and snap it into the shears.
