Page of 4
2
Thank you very much for choosing this product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This product is designed for certain applications only. The manufacturer cannot be responsible
for issues arising from modification. We strongly recommend this product not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the product until you have first contacted us to
determine if it can or should be performed on the product.
For technical questions please call
1-218-943-6296
.
INTENDED USE
S-Tine Attachment for the 3pt Garden Bedder/Hiller to cultivate or loosen soil before planting.
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this s-tine attachment
until
they have read this manual and have developed a thorough understanding of how the s-tine
attachment works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WORK AREA
•
Keep work area clean,
free of clutter and well lit.
Cluttered and dark work areas can cause
accidents.
•
Keep children and bystanders
away while operating the s-tine attachment. Distractions can
cause you to lose control, so visitors should remain at a safe distance from the work area.
•
Be alert of your surroundings.
Using the s-tine attachment in confined work areas may put
you dangerously close to cutting tools and rotating parts.
