Field of View GeoSnap Basic Manual 7
Battery Charging
1)
Plug in the AC adapter into the wall.
2)
Plug in the barrel power plug from the AC adapter into the DC-4S charger/voltage checker. Check to make
sure that 3 dashes are displayed before plugging in the battery (this indicates that there is indeed power
getting to the charger and that it
isn’t
just operating as a voltage checker).
3)
Insert
the balance plug of the battery into the connector labeled “3 Cells”. The
charger will display the
overall voltage battery and the voltage of each cell as it charges. Charging a fully depleted battery takes
about 2 hours and 30 minutes.
4)
Once the battery is fully charged, the charger will display “FUL” and begin to beep. At this point you
should disconnect the battery and unplug the AC adapter from the wall.
Purchasing Additional Batteries
Additional batteries, charger/voltage checkers, and AC adapters can be purchased directly via the links below:
Battery:
https://hobbyking.com/en_us/turnigy-9xr-safety-protected-2200mah-3s-1-5c-transmitter-pack.html
DC-4S charger/voltage checker:
https://hobbyking.com/en_us/hobbykingr-dc-4s-balance-charger-cell-checker-
AC Power Adapter:
https://hobbyking.com/en_us/power-supply-12v-3a-interchangeable-plug-adapter-
