background image

W A R N I N G

ALWAYS 

read and understand all warnings and instructions 

before each use of this product. Failure to read and 
understand all warnings and instructions may result in 
serious injury or death.

NEVER

 exceed weight limit of 

300 lbs. DO NOT

 use if your 

combined weight with all your hunting gear and any 
accessories exceeds 

300 lbs. 

Use of tree stand over the 

weight limit may result in serious injury or death.

ALWAYS

 inspect the tree stand for signs of wear or 

damage 

BEFORE 

each use. Also inspect to ensure that 

nuts and bolts are secure and straps are not frayed, worn, 
or broken.

ALWAYS

 wear a Fall Arrest System (FAS) after leaving the 

ground. If you are not wearing an FAS that meets TMA 
standards, 

DO NOT leave the ground

. Failure to wear an 

FAS may result in serious injury or death.

DO NOT

 use this tree stand while under the influence of 

alcohol, medication, or illegal substances. Use of tree stand 
while under the influence of any of these substances may 
result in serious injury or death.

NEVER

 use this tree stand if you have a history of health problems 

such as 

(but not limited to) 

heart problems, back problems, 

impaired vision, equilibrium impairments are afraid of heights or 
have been advised by a doctor not to do any strenuous activity. If 
you are feeling ill, nauseous, or dizzy 

DO NOT

 use this tree stand 

or If you are not physically fit, well rested and alert. Physical 
ailments can reduce your ability to safely install, utilize and remove 
your tree stand.

NEVER

 use this tree stand during inclement weather such as (but 

not limited to) thunderstorms, snowstorms, hurricanes, icy 
conditions, or high winds that could create slippery or dangerous 
situations.

NEVER

 use this tree stand on a dead, leaning, loose barked tree or 

on a utility pole as the tree may fall, break, or uproot and may result 
in serious injury or death.

DO NOT

 modify or alter your tree stand.

ALWAYS 

make sure that the straps connecting the top and 

bottom platforms are secured and at the proper length 
recommended.

ALWAYS

 make platform level adjustments at ground level. 

NEVER

 remove or deface warning labels. 

Manufactured in the year 2011

ALWAYS

 ensure that the platforms are tilted slightly 

upward at ground level to allow for the decrease in tree 
diameter when ascending.

ALWAYS 

make frequent adjustments to the harness tether, 

coordinated with tree stand movement to maintain the least 
amount of slack in the tether that will allow for climbing.

ALWAYS

 practice at ground level before using in a hunting 

environment. 

Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869 1-866-972-6168 Contact for replacement labels

Item# HEH00541   HEH00543  HEH00557  HEH00571  51011    51032

Failure to follow all warnings listed below could result in serious injury or death.

Summary of Contents for PRIMETIME LITE HEH00557
















Reviews: