Field & Stream PRIMETIME LITE HEH00557 Instruction And Safety Manual Download

Page: 6 / 15

Distributed by Primal Vantage Company Inc. 685 Route 10 East, Randolph, NJ 07869

Customer Service Department 1-866-972-6168

www.treestandcustomerservice.com

Assembly Instructions Page 1

MODEL: HEH00557

Primetime Lite

Frame Support

2. Lift railing and insert frame support through attached bolt

5. Repeat above steps to assemble the foot platform

3. Thread T-knob on bolt.

4. Insert

1-M10 Quickclip

through frame support and

welded tab to secure frame in place.

6. Insert Shooting Rail

into Seat Platform

Adjust Shooting Rail to proper length and insert

2-M10 Quickclips

through shooting rail and frame.

1. Insert

1-M12x75mm bolt

through the bottom of Seat

Platform and

1-M12x75mm bol

t through the bottom of Foot

Platform.

Summary of Contents for PRIMETIME LITE HEH00557
















Search results

Summary of Contents for PRIMETIME LITE HEH00557

Reviews:

Related manuals for PRIMETIME LITE HEH00557

Brands by name

Popular brands

Field & Stream PRIMETIME LITE HEH00557, Instruction And Safety Manual

Search results

Summary of Contents for PRIMETIME LITE HEH00557

Reviews:

Related manuals for PRIMETIME LITE HEH00557

Brands by name

Popular brands