Fidelix FX-RP multiDISPLAY
Programming manual
page 7 of 38
Installation
Our software is designed for Windows, and uses a lot of its embedded features. It also doesn’t have an
installation wizard where a User Account Control check could be done to give administrative rights to the
programs, which is why all our programs need to be granted sufficient rights in another way. There are two ways
to do this:
The first is by unblocking the downloaded files (in the file properties dialog box) in Windows file explorer as
follows:
NOTE:
This needs to be done for all programs, as well as for all files!
The second way to achieve the same goal is by following the steps below carefully; sometimes, the unblocking
doesn’t seem to be enough, and then the following method needs to be used:
1. Unzip the program (preserving the subfolder structure!) and save the folder on your local hard drive.
2. Delete the downloaded zip-file.
3. Re-zip the whole folder you just unzipped locally and save the new zip-file on your local hard drive
4. Delete the previously unzipped folder (the folder unpacked from the downloaded zip-file).
5. Now, from the locally generated zip-file, unzip again the same folder (again, preserving the subfolder
structure!) and save the folder on your local hard drive.
6. Delete the locally created zip-file.
7. Do the same for all software AND the example folders. (
IMPORTANT!
)
