6.7 TO ENTER AND QUIT FROM SUPPLEMENTARY FUNCTION MODE
6.7.1 To Enter a Function Mode: -
Press
[FUNC]
to shift among Piece Count
(CoUnt)
, Percentage
(PErCnt)
,
Animal weighing
(Ani)
modes and press
[M+]
to enter when the desired
mode name is being displayed.
6.7.2 To Enter and Quit from a Function Mode
To change enter a specific supplementary function mode, press
[FUNC]
until the desired supplementary function mode appears.
Then press
[M+]
to enter,
To quit from a supplementary function mode, press
[FUNC]
followed
by
[ZERO]
.
6.8 PIECE COUNT FUNCTION
15
Follow the below steps to enter
Piece Count Function: -
a. Refer to
6.3
on how to select the desired weight unit,
b. If a container is used, place it onto the platform and press
[TARE]
,
c. Press
[FUNC]
to shift among various functions until Piece Count
(CoUnt)
appears,
d. Press
[M+]
to enter,
e. Default
16
sample size and
PCS INDICATOR
appear.
f.
This scale is now in
Piece Count Function
.
g. Refer to
6.8.1
for subsequent operation procedures.
6.8.1 Sampling Process
a. Put samples with same quantity on platform then press
[M+]
. Should a
different sample size is required, enter the quantity of the sample size
through the numeric keys
17
,
b. Apply samples with the same quantity as being displayed on this
scale
18
and press
[M+]
,
c. This scale will calculate, store the average piece weight and confirm
15
Piece Count Function Mode does not support memory accumulation (M+) function.
16
Default sample size value = 50 pieces
17
Usually, the more the sample size, the better the counting accuracy.
18
Although there is no restrictions on the minimum average price weight, for counting
accuracy, it is recommended that the average piece weight should not be less than 0.25d
or 0.25d
1
(dual range mode)
