FIC P4-875P MAX User Manual Download Page 6

Page: 6 / 68

1 - 2

875 Dynasty Mainboard Manual

NOTE: lst Utilities

CD that contains patch files, onboard video/au-

dio chip drivers, related online help and other useful information
can be found in your mainboard package.

Please install it right after your Windows operating system installa-
tion is done.

Place your lst Utility in the drive, an operating menu will

appears in your monitor. Please select

Auto Installation

. It will auto-

matically detect which software tools (patch files, drivers) that the
mainboard needs. Press

button to go through the whole instal-

lation procedure in a very straight forward and easy way. It also
provides you with a custom way to select wanted patch files and
software drivers that for onboard chips use.

The top menu of lst

Utilities lists all the functions that allowed by this board.

Package Checklist

If you discover any item below was damaged or lost, please contact your
vendor.

Summary of Contents for P4-875P MAX





































































Search results

Summary of Contents for P4-875P MAX

Reviews:

Related manuals for P4-875P MAX

Brands by name

Popular brands

FIC P4-875P MAX, User Manual

Search results

Summary of Contents for P4-875P MAX

Reviews:

Related manuals for P4-875P MAX

Brands by name

Popular brands