FIC CW001 User Manual Download

Page: 109 / 116

Caring for Your Mini-note

109

8.6 When You Travel

For safety and convenience when traveling, please follow these instructions:

•

Back up all needed files on your hard disk before traveling.

•

Recharge your battery overnight to ensure full battery power before you
leave.

•

Don't forget to bring along the AC adapter and extra battery pack.

•

Try to bring backup software as well.

•

Check the voltage rating and the outlet type of your destination. If the
power cord of the adapter is different, then you need to purchase a
suitable one. Consult your dealer.

•

Carry your Mini-note in its carrying case or in a briefcase. Never check-in
the Mini-note as a luggage.

•

Remember to apply those power saving features and techniques to save
battery power.

Summary of Contents for CW001





















































































































Search results

Summary of Contents for CW001

Reviews:

Related manuals for CW001

Brands by name

Popular brands

FIC CW001, User Manual

Search results

Summary of Contents for CW001

Reviews:

Related manuals for CW001

Brands by name

Popular brands