S.CON1M TX/FX Managed Converter
27
The management application also enables you to receive traps sent by the converter
(figure 6). Following is a list of all traps that can be sent by the S.CON1M:
•
System up (cold start)
•
Temperature (when exceeds 65
0
C for more than 1 minute)
•
TP link down
•
FO link down
•
TP link up (after at least 10 secs down)
•
FO link up (after at least 10 secs down)
•
FO signal detect down
•
FO signal detect up (after at least 10 secs down)
•
TP FDX/HDX change
•
FO FDX/HDX change
•
TP 10/100M change
•
Auto Negotiation change (enable/disable)
•
TP port connection/disconnection
Note: traps will be received a few seconds after the actual event has occurred.
•
Figure 6
–
traps (listed at bottom of screen)
