S.CON1M TX/FX Managed Converter
10
5 – Front Panel components Identification
1-
MDI-II / MDI-X selector
2-
10/100Base-TX connector port (shielded RJ45)
3-
Twisted pair operation (3 LEDs, 4 functions)
Link/ Act
- twisted pair link present (LED steady lit)
When blinking implies activity (transmit or receive mode)
FDX
- full duplex operation
100M
- TP is working at 100Mbps (when the LED is off, the speed is 10Mbps)
4-
SC fiber optic connector (left/Tx & right/Rx); ST connector (S.CON1M/T model) 5
-
5-
Fiber optic LED indicators
Link/ Act
- twisted pair link present (LED constantly lit)
When blinking implies activity (transmit or receive mode)
SD
(signal detect) signal present during receive mode
FDX
- full duplex operation
6-
MODE SETUP 7 positions DIP switches
7-
POWER LED indicator
LED lit Main power supply installed and operating.
8-
MiniDIN connector for management set-up and S/W updates (RS232 Console
port)
9-
Management module status LED indicators
RCV
– the internal SNMP agent is receiving data
Ready
– When LED is blinking implies that the SNMP agent logic is in the
initialization stage. When LED steadies lit: SNMP agent is ready
