Advanced FE/E1 Fiber Converters
24
15 - Specifications
Standard Compliance
IEE 802.3/802.3u, 10Base-T, 100Base-TX, 100Base-FX, FDSE
Far End Fault (FEF) support
IEEE 802.3x FDX Flow Control and HDX backpressure flow control
Frame length range: 64 ÷ 1916 bytes max; Supports 1K Mac addresses
LAN or Aggregation (VLAN) mode of operation
10/100BaseTX port x 4
•
Shielded RJ-45 connector
•
Speed and Half/full duplex support via auto-negotiation (default for all TP ports)
•
Port 1 can be forced to 10/FDX, 10/HDX, 100/FDX or 100/HDX
via DIP switches S7, S8, S9
•
100m over STP Cat 5 cabling
•
MDI/MDI-X Auto-Cross support
100Base-FX port
•
1310nm multi-mode, Duplex SC 62.5/125 fiber, Full Duplex
•
Single Mode Fiber: Duplex SC connector
•
Single Fiber – Strand: Single SC connector
Refer to F/O port specifications (section 9)
Diagnostics: 19 LEDs
•
Link, Activity (Tx or Rx), 100Base-FX port
•
Link, Activity (Tx or Rx), FDX, 100M for each TP port
•
Local, Remote, LOS for E1 port (FEM models)
•
LOS and Signal LEDs for each E1 port (FEM4 models)
•
LAN mode or Aggregation (VLAN) mode (FEM models)
•
Link Partner
•
Power: power on / off
