Reproduction forbidden without Fibocom Wireless Inc. written authorization - All rights
reserved.
FIBOCOM SC138-
NA
Series Hardware Guide
11/88
2 Product Overview
2.1
Product Introduction
SC138 series intelligent modules integrate core devices such as Baseband, eMCP, PMU, Transceiver
and PA, and support remote communication modes of FDD/TDD-LTE, WCDMA, and multiple types,
WIFI/BT short-range wireless transmission technology and GNSS wireless positioning
technology(SC138-W support WiFi/BT only). SC138-NA series modules are embedded in the open
Android operating system and support multiple interfaces such as MIPI/USB/UART/SPI/I2C, so they are
the preferred schemes for the core system of wireless intelligent products. The corresponding network
type and the band of SC138 modules are shown in the following table:
Table 2-1 Available band of SC138-NA
Mode
Band
WCDMA
Band 2/4/5
FDD-LTE
Band 2/4/5/7/12/13/14/17/25/26/66/71
TDD-LTE
Band 41/48
WIFI 802.11a/b/g/n/ac
2402-2482 MHz
；
5170-5835MHz
BT5.0
2402-2480 MHz
GNSS
GPS +GBeiDou
2.2
Performance
SC138-NA modules are packaged with LCC+LGA and have a total of 276 pins, including 148 LCC pins
and 128 LGA pins, with the dimensions of 41 mm × 41 mm × 2.8 mm. They can be embedded in various
M2M product applications, and are applicable to the development of intelligent POS, cash register, robot,
unmanned aerial vehicle, home automation, security monitoring, multimedia terminal and other intelligent
devices. The following table describes the detailed performance parameters of SC138 series modules.
