™
PathMat
b
arefoot
frIendly
e
asy
InstallatIon
The access routes built utilizing the PathMat are ready for use immediately following installation. Please follow these maintenance
recommendations to ensure a long life and optimal performance of your PathMat Beach Access Mats.
Maintenance Recommendations
Note 1: In the case of a large storm or windy conditions, remove accumulated sand from the surface of the PathMat with a hand push
broom. A flat shovel may be used in the case of excessive sand accumulation. Take care to not damage the mat when removing sand.
Note 2: In the event of movement and sifting, it is recommended that accumulated sand be removed from beneath the mat to reduce
the tension on the mat sections. Simply remove the pins and roll the mat backwards. Rake the sand flat and reinstall the end per the
installation instructions.
Note 3: At no time in maintenance is it acceptable to use vehicular means to reposition or remove sand from the mats. This can cause
damage to the mat sections.
Note 4: Clean the mats with a pressure washing machine.
Please note that the information above is given as a guide only. Fiberweb cannot be liable for damage caused by incorrect installation of this product. Final
determination of the suitability of any information or material for the use contemplated and the manner of its use is the sole responsibility of the user and the user
must assume all risk and responsibility in connection therewith.
paTHMaT™
PRODUCT SPECIFICATIONS
pHYsIcal cHaRacTERIsTIcs:
Structure
Oscillated
Polymer
Elastomeric
PE Blend
Color
Light Blue
UV Stabilized
Yes
noMInal dIMEnsIons:
Roll Width
5 feet
Roll Length
32.8 feet
Roll Weight
125.5 lbs.
Weight per square foot
.76 lb/ft
2
Thickness
0.50 inches
Mesh Aperture
3:1 ratio
TEcHnIcal cHaRacTERIsTIcs:
Measurement
Method
Results
Tensile strength (MD)
ISO 10319
16kN/m
Yield point elongation (MD)
130%
Residual thickness @ 500 kPa
ASTM D1621
22%
Slip risk PTV value
BS7976: 1-3
>40
(low slip)
paTHMaT™
U-Pins
Product
U-Pin
Material
Rebar Type Galv Wire
Size
6” x 16” x .360” dia
Outer
10 pack
PathMat
™
