79-15167-00 REV. A
www.fiberstars.com
Page 3 of 10
INSTALLATION INSTRUCTIONS
The illustration below shows the components that make up the FDS. For NEW installations, all components
are supplied and utilized. For UPGRADING existing installations, the brass plate assembly below is not
supplied and utilized.
INDICATOR LIGHT AND LENS
NOTE: ALREADY INSTALLED
DO NOT REMOVE
FDS COVER
PRINTED CIRCUIT BOARD ASSEMBLY
FOR REMOTE OPERATION
NOTE: ALREADY INSTALLED
DO NOT REMOVE
FDS ROUND GASKET
FDS ADAPTER PLATE
FDS RECTANGULAR
GASKET
BRASS PLATE ASSEMBLY
NOTE: ONLY SUPPLIED AND
REQUIRED FOR NEW INSTALLATIONS
FDS ADAPTER SCREW
COVER MOUNTING SCREWS
ROCKER SWITCH
NOTE: ALREADY INSTALLED
DO NOT REMOVE
ROCKER SWITCH BOOT
NOTE: ALREADY INSTALLED
DO NOT REMOVE
The following pages show proper installation steps for NEW installations or UPGRADING existing
installations.