FIBERROAD FR-5A3010P, User Manual, Page: 3 / 11

❖
Optical Fiber Port
SFP Transceiver Module
You can select different SFP modules as required (Please refer to our SFP selection list for
the appropriate module). To insert/remove the SFP, the procedures are as follow:
1. On the side panel, insert the SFP module into the SFP port until it is securely locked.
2. Connect the optical fiber (1/2 core) to the LC connector(s) of the SFP.
3. To remove the SFP module, press down the lock of the LC connector of the optical fiber
to pull out the fiber cable.
4. Pull down the SFP lever and hold its position. Pull out the SFP module from the SFP port.
Notes: If you make your own cable, we suggest
labeling the two sides of the same line with the same
letter (A-to-A and B-to-B, shown as below, or A1-to-A2
and B1-to-B2).
❖
PoE & Power Supply
User Manual
Item Specification
PoE Port
Port 1 to 8 IEEE802.3af/at @PoE
Power Supply Pin
Default: 1/2(+), 3/6(-),Optional:4/5, 7/8(-)
Max Power Per Port
30W; IEEE802.3af/at
Total PWR / Input Voltage
125W(DC52V) @ 15.4W
240W(DC52V) @ 30W
Power Consumption
Standby
＜
4W
Full load
＜
130W@15.4W
Full load
＜
250W@30W
Power Inputs
1
Power Supply
External power adapter with AC100 – 240V 50-60Hz input
52VDC 5A output@30W per port
52VDC 2A output@15.4W per port
AC Plug Types
© 2022 Fiberroad Technology Co., Ltd All right reserved Page 3 of 11
Connector Multimode Fiber Sigle-mode Fiber
1000Base-
SX(850nm
）
Bandwidth MHZ-KM Distance
Bandwidth MHZ-
KM
Distance
260 220m 400 500m
200 275m 500 550m
1000Base-LX
(1310nm/1550nm
）
Single-mode Fiber 9/125um:2km
Single-mode Transceiver 1310nm: 10/20km
Single-mode Transceiver 1550nm: 40-120km