10
brightness for the convenience of the
Fusion Splicer operation. Display
brightness control should be done in the “standby” operation inter
face.
<1> Press
or
in the “standby” operation interface to change the
brightness of the display.
<2> Press
to confirm the brightness changes, and return to “standby”
operation interface.
When the display brightness is moderate, the capacity loss can be
reduced, and the endurance of the battery can be prolonged.
2.6 Cover fiber protection sleeve
The installation of fiber protection sleeve
2.7 Preparation of fiber end-face
2.7.1 Open the big and small clips of the cutter; push the sliding plate
installed with blade from the end to the front.
