FiberHome AN6000-17, Hardware Description

Page: 39 / 88

3 Cards
u The switch module aggregates signals from eight ports.
u The control module loads the card software, controls the card operation, and
manages the card.
u The power module supplies power to each functional module of the card.
u The clock module provides the working clock signal for each functional module
of the card.
3.7.2 GM8A
Basic Information
Card Overview describes the number and power consumption of the card.
Panel Description
Table 3-13 Interfaces
Identifier
Meaning Description
1 to 8
GPON & XG-PON Combo port
Connects to a remote ONU via the ODN.
Table 3-14 Indicator LEDs
Identifier
Meaning
Color Status
Description
ACT
Working
indicator LED
Green
ON
The card is working normally.
Blinking slowly The card is being initialized.
Blinking
quickly
The card is receiving a
configuration command or the
communication link between the
active and standby cards is being
set up.
OFF
The card is not powered on or the
software is not started.
ALM
Alarm indicator
LED
Red
ON
The card has alarms, or the
communication between the
active and standby cards is
interrupted.
OFF The card has no alarms.
Version: A 31