FiberHome AN6000-17, Hardware Description

Page: 37 / 88

3 Cards
Table 3-11 Interfaces
Identifier
Meaning Description
1 to 8
XG-PON port
Connects to a remote ONU via the ODN.
Table 3-12 Indicator LEDs
Identifier
Meaning
Color Status
Description
ACT
Working indicator
LED
Green
ON
The card is working normally.
Blinking slowly The card is being initialized.
Blinking
quickly
The card is receiving a
configuration command or the
communication link between the
active and standby cards is
being set up.
OFF
The card is not powered on or
the software is not started.
ALM
Alarm indicator
LED
Red
ON
The card has alarms, or the
communication between the
active and standby cards is
interrupted.
OFF The card has no alarms.
LINK1-8
Port status
indicator LED
Green
ON
The port is connected to an
ONU at the far end, and the
ONU has been authorized.
OFF
The port is not connected to an
ONU at the far end, or the far-
end ONU is not authorized.
Technical Specifications
Item
Specification
Network standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z,
IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, etc.
Switching mode
Store-and-forward
Supported MAC address quantity
250 k
Maximum split ratio
1:256
Maximum quantity of T-CONTs
2048
Bandwidth allocation granularity
64 kbit/s
Optical fiber connector
SC/PC
Version: A 29