3 Product Installation
Version: A
3-5
Note: This power adapter can convert 220V AC into 12V DC input
for the AN5506-04-A so as to supply power to the device.
3.4 Examination
after
Installation
After the connection of wires and cables is finished and relevant services
are started up by your ISP, it needs to power on and examine the
AN5506-04-A as below:
Switch on the power.
Observe the status of
Power
indicator LED. If
Power
indicator LED
is on, it means the power-on of the device is normal. Otherwise,
please check whether the connection of power cable is correct.
Observe the status of
LOS
indicator LED. If
LOS
indicator LED is
off, it means the optical fiber connection is normal. Otherwise,
please check whether the connection of optical fibers is correct.
Observe the status of
LAN
indicator LED. If
LAN
indicator LED is
on or blinks, it means the network cable is connected normally.
Otherwise, please check whether the connection of network cable is
correct.
Ensure the ventilation around during the device running to avoid
problems because of overheating. In the case of abnormity, contact
the local office of FiberHome for replacement, so as not to affect
equipment running.
