©
Copyright 2018, Fiber Mountain, Inc. All Rights Reserved
11
Sensus FPA Installation Manual
150-00006.01.04
•
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with this equipment.
•
Make sure the mounting surface or rack is stable and can support the size and weight of
this equipment.
•
The mounting surface or rack should be appropriately anchored according to
manufacturer's specifications. Ensure this equipment is securely fastened to the mounting
surface or rack where necessary to protect against damage due to any disturbance and
subsequent fall.
Ventilation
This equipment has openings for ventilation to protect it from overheating. To ensure
equipment reliability and safe operation, do not block or cover any of the ventilation openings. Install
the equipment in accordance with the manufacturer's instructions.
Rack Mounting Safety Precautions
Mechanical Loading
•
Make sure that the rack is placed on a stable surface. If the rack has stabilizing devices,
install these stabilizing devices before mounting any equipment in the rack.
WARNING:
Avoid personal injury and damage to this equipment. Mounting this equipment in the rack should be
such that a hazardous condition is not caused due to uneven mechanical loading.
Reduced Airflow
•
When mounting this equipment in the rack, do not obstruct the cooling airflow through the
rack. Be sure to mount the blanking plates to cover unused rack space. Additional
components such as combiners and net strips should be mounted at the back of the rack,
so that the free airflow is not restricted.
CAUTION:
Installation of this equipment in a rack should be such that the amount of airflow required for safe
operation of this equipment is not compromised.
Elevated Operating Ambient Temperature
•
Only install this equipment in a humidity- and temperature-controlled environment that
meets the requirements given in this equipment's technical specifications.
CAUTION: