©
Copyright 2018, Fiber Mountain, Inc. All Rights Reserved
10
Sensus FPA Installation Manual
150-00006.01.04
in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
Fiber Mountain has not approved any changes or modifications to this device by the user. Any
changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec.
15.21.
FCC ID: 2APNW - SENFG1MA
Installation Site
•
When selecting the installation site, comply with the following:
•
Protective Ground -
The protective ground lead of the building's electrical installation
should comply with national and local requirements.
•
Environmental Condition
–
The installation site should be dry, clean, and ventilated. Do
not use this equipment where it could be at risk of contact with water. Ensure that this
equipment is operated in an environment that meets the requirements as stated in this
equipment's technical specifications, which may be found on this equipment's data sheet.
Installation Requirements
WARNING:
Allow only qualified service personnel to install this equipment. The installation must conform to all
local codes and regulations.
Equipment Placement
WARNING:
Avoid personal injury and damage to this equipment. An unstable mounting surface may cause this
equipment to fall.
To protect against equipment damage or injury to personnel, comply with the following:
•
Install this equipment in a restricted access location.
•
Do not install near any heat sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produce heat.
•
Place this equipment close enough to a mains AC outlet to accommodate the length of this
equipment's power cord.
•
Route all power cords so that people cannot walk on, place objects on, or lean objects
against them. This may pinch or damage the power cords. Pay particular attention to
power cords at plugs, outlets, and the points where the power cords exit this equipment.