Fiat 500L 2015, User Manual

Page: 111 / 148

4 . Have the tire inspected and repaired or replaced at the earliest opportunity at an
authorized dealer or tire service center
.
5 . Remove the Speed Limit sticker from the instrument panel after the tire has been
repaired
.
6 . Replace the Sealant Bottle (1) and Sealant Hose (6) assembly at your authorized
dealer as soon as possible
.
Refer to “(F) Sealant Bottle and Hose Replacement
.
”
NOTE:
• If the tire becomes over-inflated, push the Deflation Button to reduce the tire pressure
to the recommended inflation pressure before continuing .
• When having the tire serviced, advise the authorized dealer or service center that the
tire has been sealed using the Tire Service Kit .
(F) Sealant Bottle And Hose Replacement:
1
.
Uncoil the Sealant Hose (6) (clear in color)
.
2 . Locate the round Sealant Bottle release button in the recessed area under the sealant
bottle
.
3 . Push the Sealant Bottle release button . The Sealant Bottle (1) will pop up . Remove the
bottle and dispose of it accordingly
.
4 . Clean any remaining sealant from the Tire Service Kit housing .
5 . Position the new Sealant Bottle (1) in the housing so that the Sealant Hose (6) aligns
with the hose slot in the front of the housing
.
Push the bottle into the housing
.
An audible click will be heard indicating the bottle is locked into place .
6
.
Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and
return the hose to its storage area (located on the bottom of the air pump)
.
7
.
Return the Tire Service Kit to its storage location in the vehicle
.
NOTE:
• The metal end fitting from Power Plug (8) may get hot after use, so it should be
handled carefully
.
• Failure to reinstall the cap on the fitting at the end of the Sealant Hose (6) can result
in sealant contacting your skin, clothing, and the vehicle’s interior . It can also result in
sealant contacting internal Tire Service Kit components which may cause permanent
damage to the kit
.
WHAT TO DO IN EMERGENCIES
109