Fiat 500L 2013, Owner'S Handbook Manual

Page: 76 / 420

Activating/deactivating the device
Press the CANC RES button to activate/deactivate
the device.
The activation of the device is indicated by the
warning light on the instrument panel switching
on.
The deactivation of the function is instead indicated
by the
symbol on the display.
Exceeding the programmed speed
By fully depressing the accelerator pedal, the
programmed speed can be exceeded even with the
device active.
In this case the device is deactivated temporarily and
the set speed flashes on the display.
Reducing the speed below the programmed value
reactivates the device automatically.
Flashing of programmed speed
The programmed speed flashes in the following
cases:
❒
when the accelerator pedal has been fully
depressed and the car speed has exceeded
programmed speed;
❒
when the device cannot reduce the speed of the
car due to the gradient of the road;
❒
in the event of sharp acceleration.
Deactivating the device
To deactivate the device, turn ring nut A to O .
The deactivation of the device is indicated by the
warning light switching off on the instrument
panel and, on some versions, by a message and
symbol on the display.
Automatic deactivation of device
The device deactivates automatically in the event of
fault in the system.
72
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
IMPORTANT A jerk and increased load is perceived
when the accelerator pedal end of travel is reached.
This, to signal to the driver that the speed control
system is being deactivating.
IMPORTANT With the device deactivated, the car
maximum speed is reached before the end of travel
with a jerk and the load hardening. The jerk is also
present with the device deactivated.