Preparations For Jacking
1
.
Park the vehicle on a firm level surface, avoiding ice or slippery areas
.
WARNING!
Do not attempt to change a tire on the side of the vehicle close to moving traffic, pull
far enough off the road to avoid the danger of being hit when operating the jack or
changing the wheel
.
2
.
Turn on the Hazard Warning flashers
.
3
.
Set the parking brake
.
4
.
Place the gear selector in PARK (Euro Twin Clutch Transmission) or REVERSE (manual
transmission)
.
5
.
Turn Off the ignition
.
6
.
Block both the front and rear of the wheel diagonally opposite of the jacking position
.
For example, if changing the right front tire, block the left rear wheel
.
NOTE:
Passengers should not remain in the vehicle
while the vehicle is being jacked
.
Wheels Blocked
WHAT TO DO IN EMERGENCIES
111
