Display
F1X5_RS
Data: 13/01/16
file: F1X5_RS_ing.doc
Pag 2/12
Manual purpose
This manual has been designed by the Manufacturer to provide the necessary information regarding the
instrument to those who are authorized to carry out safely its installation, maintenance, dismantling and disposal.
All the necessary information for the buyers and planners can be found in the “Sales catalogue”.
Besides than adopting good technical construction methods, the information should be read carefull yand strictly
applied.Inobservance of this information could cause risks for the health and safety of people and economical
damage. This infor-mation, provided by the Manufacturer in the original language(Italian) is also available in other
languages to satisfy legislative and/or commercial needs.
This manual must be kept in a good condition by a responsible person in an ideal place so that it is always
available for consultation. In case of loss or deteriorioraation of the manual, a replacement should be requested
directly from the manu-facturer quoting the manual’s code.
This manual reflects the state of skill of the instrument at the time of input on the market: however the
manufacturer reserves the right to make changes , add or improve the manual without giving any reason to hold
the present manual inade-quate.
Identification of the equipment
The identification plate represented is applied to the instrument. To find the
identification code of the instrument, consult the sales catalogue.
Environmental conditions
Temperature setting: min. 0°C, max. + 50°C.
It is forbidden to use the instrument other than its specific use and in potentially explosive conditions or where anti-
explosive elements are used.
Storage
Here below are some references to be followed for the storage of the instrument
Avoid environments with excessive humidity and those exposed to bad weather (avoid open areas). Avoid putting
the instrument directly on the ground. Store the instrument in its original packing.
Conformity declaration and EC marking
The instrument answers to the following Communitarian Directives:
2014/30/EU Electromagnetic compatibility, 2014/35/EU Low voltage, 2011/65/EU RoHS.
Maintenance
Reparations should be done only and exclusively at the FIAMA technical assistance centre.
Turn off the power before touching the internal parts. Clean the external plastic parts using a soft, damp cloth with
ethylic alcohol or water.
Do not use hydrocarbon solvents (petrols, diluants): using these products could affect the proper mechanical
functioning of the instrument.
Calibrations and tests
It is advisable to calibrate the instrument periodically, once every working year. To do the calibration , follow the
calibration procedure indicated in the present manual .
For any kind of technical assistance request, contact the sales department of the Manufacturer directly indicating
the information given on the identification plate, the number of hours used and the type of defect.
Manufacturer’s responsibility
The manufacturer declines any responsibility in case of :
• Using the instrument contrary to the national safety and accident-prevention laws.
• Wrong installation, inobservnace or wrong procedures of the instructions provided in the present manual.
• Defective electrical power supply.
• Modifications or tamperings.
• Operations carried out by untrained or unqualified personnel.
The safety of the instrument also depends on the strict observance of the procedures indicated in the manual:
always operate the instument in its functioning capacity and carry out a careful routine maintenance.
• All phases of inspection and maintenance should be done by qualified personnel.
• The configurations provided in the manual are the only ones permitted.
• Do not try to use them anyway contrary to the indications provided.
• The instructions in this manual do not substitute but accomplish the obligations of the current legislation
regarding the safety laws.
