Page 34
Short Manual
ResistTel IP2 / IP152
ExResistTel IP2 / IP154
2.3.9
Transferring a Call
You are making a call and would like to transfer it to another party.
Torsten 72
Peter 36
Torsten 72
Thomas 70
06.01.10 14:40 0:22
Figure 23: Transferring a Call
1.
Press the key (short) during a call.
The call is put on hold. You hear a dial tone. The line on hold is displayed
normally and the active line inversely.
2.
Dial the call number of your choice.
The connection is established. If the called party answers, this can be treated like
a second call, as above.
3.
To connect the caller will be connected with the dialled number you have the
following possibilities:
a.
Put the handset back on its rest (handset mode).
b.
Press the loudspeaker key (hands free mode).
c.
Press the headset key (Key long (longer than a second) and then the
loudspeaker key ) (headset mode).
d.
Press the key
(short) followed by the key
. The caller will be
connected with the dialled number.
Tip
When transferring a call, you do not have to wait until the desired subscriber
answers. You can hang up immediately after dialling the phone number.
