Page 30
Short Manual
ResistTel IP2 / IP152
ExResistTel IP2 / IP154
2.3.3.3
Dialling during existing Connections
During existing connections all entered digits (0 – 9, *, #) are transmitted as DTMF
signals. Using this DTMF procedure it is possible to access menu-controlled services
(e. g. answering machines, voice boxes) directly via the telephone keypad.
2.3.4
Redialling
Up to 100 of the last numbers dialled are saved automatically, together with the time
and date, and can be dialled again.
01 06.02.10 11:30
Martin 73
02 06.02.10 11:30
Thomas 70
03 06.03.10 11:29
Peter 36
< Calls (outbound)
Figure 18: List of Recently Dialled Numbers and Sent Messages
Dialling numbers from the redial list
1.
In the initial condition, press the key (long). The list of numbers dialled last is
displayed (see Figure 18).
•
Success (connected/not connected).
The symbol on the display indicates that there has been a successful call. A
not connected call will be displayed without a symbol.
•
The symbol on the display indicates that there has been a redirected call.
•
The symbol on the display indicates that there has been a transferred call.
•
The symbol
on the display indicates that there has been a dialled number
on a locked telephone.
•
The symbol on the display indicates that there has been an automatic call.
•
The symbol on the display indicates that there has been a message sent.
2.
Use the arrow keys to select the desired entry.
3.
Respectively to the wanted calling mode, you can setup the call as follows:
a.
Lift off the handset (handset mode).
