Page 11 of 25
L011-61
Rev. F0
2019-08-08
6. Place the two 8mm thumbknobs in the free indexing ring tapped holes and thread them in lightly. Mount the drape
support as shown, tightening the thumbknobs until the drape support is held securely.
7. Secure the center positioner to the inserter.
8. Install the insertion tube with stylet into the inserter. When the inserter and positioner are mounted on the platform in the
center hub, the tip of the stylet will be exactly at the predicted target.
9. Disassemble all parts and lay them out in preparation of the start of the surgery.
