FGE Elettronica SLM1, Quick Reference

Page: 2 / 20

FGE Elettronica S.p.a
Via C.A. Dalla Chiesa, 10
25017 – Lonato del Garda (BS)
P.I. IT01975940162 Tel: 030 9919700
Fax: 030 9913955
info@fgespa.com
www.fgespa.com
EN SLM1: Quick Reference – Rev06
Page 2/9
1 General information
Scheme of the system with concentrator and pedals as options (and a bridge for direct connection C T1)
Notes:
- Patch cords of the headers are provided pre-wired.
- Connectors “ “ represent the RJ45 connectors used for BUS/power patch cord (supplied).
- Connectors “ “ represent the spring-clamps used for fixing the pedals.
-
Connector “ “ represents the screw-clamp used for fixing the power cable.
- Option 1: system combination with activation sensors incorporated into the headers
-
Option 2: system combination with additional activation pedals connected to a signal concentrator.
Legend:
Symbol Description Function
T1
Header for two panels Control of doors 1 and 2
D1
Motor driver 1 Driver and motor: reception of commands from the control unit
D2
Motor driver 2 Driver and motor: reception of commands from the control unit
Cnt
Control unit Control unit: management of the entire system, parameters
and movements of the system
C
Signals concentrator Auxiliary inputs that are monitored and connected to the
signals concentrator. The status of these inputs is transferred to
the control unit
T2
Expansion header Optional: necessary to handle doors 3 and 4
T3
Expansion header Optional: necessary to handle doors 5 and 6
P1 … Pn
Opening pedals Door opening
L
Power supply line Connection to the power supply line
Cn
(1,2,3,4)
Connection cables between
parts Connection cables for transferring signals and power supply
NOTES:
- Drivers D1 and D2 of each header are pre-wired, as well as the connection between D1 and D2.
- Parts are linked to one another with a single cable type (supplied); this cable allows to transfer information and power
supply. The main power supply of the system is applied to the control unit only.
Option 2
D1 D2
T1
Cnt
C
D1 D2
T3
D1 D2
T2
P1 P2
Pn
Cn1
Cn2
Cn3
Cn4
L
Option 1
Cn1