6
Control and Operational Screens
The FETCO® Hot Water Dispenser uses a digital display screen and illuminated touch pads to control the set-up and on-off
water functions.
-Upper and lower pads are lighted when ready, and may alternately brighten and dim.
-Touch lower (red) pad to activate.
-“WARNING-HOT WATER” screen will light for two to three (2-3) seconds
-The upper (white) selector pad will light when selected temperature is ready
-Touch
and hold
lower (red) pad to dispense hot water.
-Maximum single dispense is 24ounces/700cc in 15 seconds maximum dispense time
-When dispensing an amount of water- (“DISPENSE ENABLED SCREEN”) displays after five (3) seconds inactivity.
HOME SCREEN
First screen on start-up
HEATING
No temperatures ready
DISPENSE ENABLED
Touch to go to next screen
Hot water dispense
enabled
Fault state, Error.
Screen will pulse
and lock out dispense
