Batch Parameters
F–HOW TO SAVE SETTINGS
–EXIT & RETURN TO PROGAMMING
IMPORTANT! After programming, you MUST SAVE your settings before exiting programming
mode or changes will be lost.
Settings are saved from the “F” screen as shown below.
You may exit programming at any time.
After programmed settings are saved, the brewer exits PROGRAMMING mode and returns to
regular brew operations. Settings are saved only when brewer returns to OPERATING MODE
DO NOT attempt to save by rebooting (turning power OFF then ON). All changes made will be
discarded and brewer will remain in the existing default settings.
From any screen-Press
STOP button until the
EXIT (“F”) screen
appears
From the “F” screen
Press button 2 to
toggle to show the
EXIT-YES screen
From EXIT-YES screen
Press button 1 to
toggle to show the
SAVE screen
From SAVE screen
Press button 2 to
toggle to show the
SAVE-YES screen
To SAVE and EXIT
Press button 1 to
SAVE your changes
and to EXIT to
OPERATING MODE
EXIT
F YES
–
1
2
STOP
STOP
A4
A5
3
A6
SAVE
F1 NO
+
1
2
STOP
STOP
A4
A5
3
A6
Programming A-F
A - F
1
2
STOP
STOP
A4
A5
3
A6
EXIT
F NO +
1
2
STOP
STOP
A4
A5
3
A6
SAVE
F1 YES
–
1
2
STOP
STOP
A4
A5
3
A6
