3
Installation Tips
Position the STB horizontally on a clean, dry,
steady surface with 5cm of space all around it.
Don’t stack it on audiovisual appliances that
generate heat or electromagnetic radiation.
Keep the STB away from direct sunlight, carpet,
heating and cooking sources. Do not place it
in closed cabinets, on vibrating surfaces or on
loudspeakers.
Make sure the STB is close to the TV and/or
home theatre it’s being connected to, and within
6 metres from where the remote control is
generally used.
Only use a clean, dry cloth to clean the STB
and remote control. Don’t use solvents or
cleaning agents of any kind.
Please don’t open the STB in any way. It could
be dangerous and you may lose any entitlement
to free servicing or a replacement unit.
Obviously, it’s perfectly fine to change the batteries
in the remote control.
And Now a Safety Message
The Fetch TV STB is designed to operate from
a 100V-240V 50Hz AC power source only.
Use only the original power cord and power adaptor
supplied and ensure it’s fully inserted into the back
panel of the STB before turning the Power on. Check
that the cord is free from obstruction.
If the cord is damaged, turn the power off and
contact your Service Provider for a replacement.
Before cleaning, always disconnect the Power
at the wall and back of STB. Never remove the
plug by yanking the cord.
Keep the STB away from babies, children and
sharp objects.
Do not place liquid filled items on top of the
STB and do not insert any objects through the
ventilation holes in the cover.
Any problems with the STB should only be examined
by approved and qualified service personnel.
