17
TS 75
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 60745:
Vibration emission level (3 axles)
Sawing wood
a
h
< 2.5 m/s
2
Sawing metal
a
h
= 2.5 m/s
2
Uncertainty
K = 1,5 m/s
2
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise loads
during operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with
other insertion tools or if not maintained
adequately. Take note of idling and downtimes of
machine!
2.4
Aluminium processing
When processing aluminium, the
following measures must be taken for
safety reasons
– Connect the machine to a suitable dust extrac-
tor.
– Regularly remove dust deposits from the
motor housing.
– Use an aluminium saw blade.
– Close the viewing window/chipguard.
Wear protective goggles!
– When sawing panels, they must be lubricated
with paraffin but thin-walled profiles (up to
3 mm) can be sawed without lubrication.
3
Intended use
Plunge-cut saws are intended to be used for
sawing wood, materials similar to wood, plaster
and cement-bonded fibre materials and plastics.
When fitted with special saw blades for aluminium
offered by Festool, these machines can also be
used for sawing aluminium.
Only saw blades with the following specifications
may be used:
– saw blade diameter 210 mm,
– cutting width 2.4 to 2.6 mm,
– toolholder diameter 30 mm,
– blade core thickness max.1.8 mm,
– suitable for speeds up to 5000 rpm.
Never use abrasive wheels in the machine.
The machine is designed and approved for use by
trained persons or specialists only.
–
Festool electric power tools must only be in-
stalled on work tables provided by Festool for
this purpose.
If the tool is installed in another, or
self-made, work table, it can become unstable
and result in serious accidents.
The user is liable for improper or non-
intended use.
4
Technical data
Circular saw
TS 75
Power
1600 W
(110 V version: 13 A)
No-load speed
1350 – 3550 rpm
Max. speed *
4400 rpm
Inclination
0° to 47°
Cutting depth at 0°
0 – 75 mm
Cutting depth at 45°
0 – 56 mm
Saw blade dimensions
210 x 2.4 x 30 mm
Weight (without mains
cable)
6.2 kg
Safety class
/ II
* Max. possible speed with faulty electronics
5
Operation
WARNING
Unauthorised voltage or frequency!
Risk of accident
X
The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine’s name plate.
X
In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
Always switch the machine off before
connecting or disconnecting the mains
power cable!
Connecting and detaching the mains power cable
see Fig.
[2]
.
Slide the switch-on lock
[1-8]
upwards and
press the ON/OFF switch
[1-7]
(press = ON /
release = OFF).
Pressing the switch-on lock unlocks
the plunging mechanism. The saw unit
can then be moved downwards. This
causes the saw blade to emerge from the
protective cover.
