10
RUSTOFIX
RAS 180.03 E-HR
Table of contents
1 Symbols
2 Technical data
3 Machine
features
4 Intended use
5 Safety
instructions
5.1 General safety instructions
5.2 Machine-related safety instructions
5.3 Emission levels
6 Commissioning
7 Machine
settings
7.1 Electronics
7.2 Changing the brushes
7.3 Adjusting the texture depth
7.4 Dust extraction
8
Working with the machine
9
Service and maintenance
10 Disposal
11 Accessories
12 Warranty
13 Declaration of Conformity
1 Symbols
Warning of general danger
Electric
shock
Read the operating instructions/
notes
2 Technical
data
Power consumption
1500 W
Rotational speed
800 – 4000 rpm
Tool
dia.
150
mm
Spindle thread
M 14
Dust extractor connection diameter
27
mm
Protection class
/ II
Weight 7.5
kg
The speci
fi
ed illustrations are at the begin-
ning of this operating manual.
3 Machine
features
[1-1] On/off
switch
[1-2] Switch-on lock
[1-3] LED
[1-4] Speed
control
[1-5] Support
roller
[1-6] Depth adjustment wheel
[1-7] Extractor
connector
4 Intended
use
According to speci
fi
cations, the machine
is designed to brush and texture wooden
surfaces.
The user bears the responsibility for damage
and accidents caused by improper use.
5 Safety
instructions
5.1 General safety instructions
- Before using the machine, carefully read
all of the attached safety instructions and
the operating manual.
- Keep all of the accompanying documents
and pass on the documentation if the ma-
chine changes ownership.
- Never allow children to use the machine.
5.2 Machine-related safety in-
structions
- This machine is designed for brushing.
Please read all of the safety information,
instructions, illustrations and descriptions
delivered with the machine. If the follow-
ing instructions are not observed, this
can result in an electric shock,
fi
re and/or
serious injury.
- Work such as roughing, polishing or abra-
sive cutting must not be carried out with
this machine. Performing tasks for which
the machine is not designed can create
hazards and lead to injury.
- Never use accessories that were not spe-
cially developed and designed for this
machine. Just because an accessory part
can be
fi
tted on your machine does not
guarantee danger-free operation.
- The permissible rotational speed of the
accessory must be at least as high as the
