background image

6

The sanding base is braked by a collar (6.2) in 

order to prevent any uncontrolled excessive speed 

of the sanding base. Because the collar wears 

down in the course of time, it has to be replaced 

by a new one (453388) as soon as there is any 

reduction in the braking effect. 

Accessories, tools 

 For safety reasons, only use original 

Festool accessories and tools! 
The accessory and tool order number can be found 

in the Festool catalogue or on the Internet under 

www.festool-usa.com

Systainer 

Many Festool products are shipped in a unique 

system container, called "Systainer". This provides 

protection and storage for the tool and acces-

sories. The Systainers are stackable and can be 

interlocked together. They also can be interlocked 

atop Festool CT dust extractors. 

7.1

7.2

7.3

- Place one systainer on top of the other. 
- Release all four latches on the lower systainer 

by pulling back at their top edges (7.1). 

- Slide all four latches upward (7.2). 
- Snap all four latches back to their 

fl

 at position 

(7.3) so they engage the stacking tabs of the 

upper systainer.

Warranty 

Conditions of 1+2 Warranty 

You are entitled to a free extended warranty (1 

year + 2 years = 3 years) for your Festool power 

tool. Festool shall be responsible for all shipping 

costs during the 

fi

 rst year of the warranty. Dur-

ing the second and third year of the warranty the 

customer is responsible for shipping the tool to 

Festool. Festool will pay for return shipping to the 

customer using UPS Ground Service. All warranty 

service is valid 3 years from the date of purchase 

on your receipt or invoice.

Festool Limited Warranty 

This warranty is valid on the pre-condition that the 

tool is used and operated in compliance with the 

Festool operating instructions. Festool warrants, 

only to the original consumer purchaser, that the 

speci

fi

 ed tool will be free from defects in materi-

als and workmanship for a term of one year from 

the date of procurement. Festool makes no other 

warranty, express or implied, for Festool portable 

power tools. No agent, representative, distributor, 

dealer or employee of Festool has the authority 

to increase or otherwise change the obligations 

or limitations of this warranty. The obligations of 

Festool in its sole discretion under this warranty 

shall be limited to the repair or replacement of 

any Festool portable power tool that is found to be 

defective as packaged with the User Manual.
Excluded from coverage under this warranty are: 

normal wear and tear; damages caused by mis-

use, abuse or neglect; damage caused by anything 

other than defects in material and workmanship. 

This warranty does not apply to accessory items 

such as circular saw blades, drill bits, router bits, 

jigsaw blades, sanding belts, and grinding wheels. 

Also excluded are “wearing parts”, such as carbon 

brushes, lamellas of air tools, rubber collars and 

seals, sanding discs and pads, and batteries.
Festool portable power tools requiring replace-

ment or repair are to be returned with the receipt 

of purchase to Festool (call 800-554-8741 for 

address details).

IN NO EVENT SHALL FESTOOL BE LIABLE 

FOR ANY CONSEQUENTIAL OR INCIDEN-

TAL DAMAGES FOR BREACH OF THIS OR 

ANY OTHER WARRANTY, EXPRESSED OR 

IMPLIED WHATSOEVER. ALL WARRANTIES 

IMPLIED BY STATE LAW, INCLUDING THE 

IMPLIED WARRANTIES OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE, ARE HEREBY LIMITED TO THE 

DURATION OF THREE YEARS.

Some states in the U.S. and some Canadian prov-

inces do not allow the limitations on how long 

an implied warranty lasts, so the above limita-

tion may not apply to you. With the exception of 

any warranties implied by state or province law 

as hereby limited, the foregoing express limited 

warranty is exclusive and in lieu of all other war-

ranties, guarantees, agreements and similar ob-

ligations of Festool.
This warranty gives you speci

fi

 c legal rights and 

you may also have other rights which vary from 

state to state in the U.S. and province to province 

in Canada.

Summary of Contents for ETS 150 EQ





















Reviews: