16
D U R A D R I V E
GB
5
Machine features
Accessories shown or described are sometimes not
included in the scope of delivery.
The specified illustrations appear at the beginning
of the Operating Instructions.
6
Operation
6.1
Charger cable holder [3-2]
Unwind the cable completely from the recess
before using the charger.
6.2
Changing the battery pack
Inserting the battery pack [2 A]
Removing the battery pack[2 B]
Battery pack is ready for use immediately upon
delivery and can be charged at any time.
6.3
Charging the battery pack [3]
The LED
[3-1]
on the charger indicates the respec-
tive operating status of the charger.
7
Settings
7.1
Changing direction of rotation [1-3]
• Switch to the left = clockwise rotation
• Switch to the right = counterclockwise rotation
8
Tool holder, attachments
8.1
Bit holder
The bit holder is used for fast replacement of bits.
Bit holder assembly
Set the switch
[1-4]
into MAN position.
Set the bit holder
[4-2]
completely to the hexag-
onal spindle opening
[4-4]
.
Attach bit into the holder
[4-3]
.
Then attach the depth stopper on the gear box
as specified in chapter 9.2.
Bit holder disassembly
Remove the depth stopper as specified in chap-
ter 9.2.
Use power to pull out the holder from the spin-
dle opening.
8.2
Bit replacement
You can use the depth stopper
[1-6]
for the bit re-
placement
[1-5]
.
[1-1]
Bit store
[1-2]
On/Off switch
[1-3]
Right/left switch
[1-4]
AUTO/MAN switch
[1-5]
Depth stop
[1-6]
Bit
[1-7]
Insulated gripping surfaces (grey shaded
area)
[3-1]
LED-Display
[3-2]
Cable holder
[3a]
Wall mount for charger
LED yellow - lit continuously
Charger is ready to use.
LED green - flashes quickly
Battery pack is charged to maxi-
mum capacity.
LED green - flashes slowly
Battery pack is charged with
reduced current. Li-ion is
charged to 80 %.
LED green - lit continuously
Charging is complete or is not
restarted as current charge sta-
tus is greater than 80%.
LED red - flashes
General fault indication, e.g.
incomplete contact, short circuit,
defective battery pack, etc.
LED red - lit continuously
Battery temperature is outside
the permitted range.
CAUTION
Risk of injury
Always switch off the power tool before adjusting
settings!
WARNING
Risk of injury
Always disconnect the battery pack before per-
forming any type of work on the machine!
CAUTION
Hot and sharp tools
Risk of injury
Do not use insert tools that are blunt or defec-
tive.
Wear protective gloves.
