Festool CMS-OF, Original Operating Manual/Spare Parts List

Page: 18 / 108

18
of advance.
Always work in a counter direction (direction
of advance against the rotation direction of the
routing tool).
Always guide the workpiece with both hands.
Use a workpiece holder when machining narrow
workpieces.
9 Accessories
Use only original Festool accessories and Festool
consumable material intended for this machine
because these components are designed spe-
cifi cally for the machine. Using accessories and
consumable material from other suppliers will
most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material! The order numbers
of the accessories and tools can be found in the
Festool catalogue or on the Internet under "www.
festool.com".
10 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally-responsible
recycling centre. Observe the valid national regu-
lations.
EU only
: European Directive 2002/96/EC stipulate
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
11 Warranty
For our tools, we give warranty for material and
production defects in accordance with the locally
applicable legal provisions, but in any case for at
least 12 months. Within the EU member states,
the warranty period is 24 months (verifi cation
through invoice or delivery note). Damage caused
by, in particular, natural wear, overloading, incor-
rect handling, or damage caused by the operator,
or damage caused through use of the equipment
contrary that specifi ed in the operating manual, or
damage which was known at the time of purchase,
is not covered by the warranty. Furthermore,
damage caused by the use of non-original Fes-
tool accessories and consumable material (e.g.
sanding pads, routing tools, saw blades, etc.) is
also excluded. Complaints can only be recognised
if the tool is returned while still assembled to
the supplier or an authorised Festool Customer
Service workshop. Keep the operating manual,
safety instructions, spare parts list and purchase
receipt in a safe place. Otherwise the respective,
current warranty conditions of the manufacturer
shall apply.
Note
Due to continuous research and development
work, we reserve the right to make changes to the
technical content of this documentation.
12 Declaration of Conformity
Module mounting Serial no.
CMS-OF 494836
Year of CE mark: 2008
We declare under sole responsibility that this
product complies with the following norms or
normative documents:
EN 60745-1, EN 60745-2-17, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-3 in accord-
ance with the regulations stipulated in Directive
98/37/EC (until 28 Dec. 2009), 2006/42/EC (from
29 Dec. 2009), 2004/108/EC.
Dr. Johannes Steimel 27.07.2010
Head of Research, Development and Technical
Documentation
Festool GmbH
Wertstrasse 20
73240 Wendlingen, Germany
REACH for Festool products, their accessories
and consumables
REACh is a European Chemical Directive that
came into effect in 2007. As “downstream users”
and product manufacturers, we are aware of our
duty to provide our customers with information.
We have set up the following website to keep you
updated with all the latest news and provide you
with information on all the materials used in our
existing products:
www.festool.com/reach