Festool 576941, Original Instructions Manual

Page: 16 / 18

Warning
signal
Description of
warning signal
Cause Action
Acoustic Signal Increasing, begin­
ning with two
short
Battery pack
charge low
– Charge the battery pack
– Use the newly charged battery
pack
15 Service and maintenance
WARNING
Risk of injury, electric shock
► Always remove the battery pack from the
cordless mobile dust extractor before per­
forming any maintenance or service work.
► All maintenance and repair work which re­
quires the motor housing to be opened
should always be carried out by an author­
ised service workshop.
CAUTION
Certain cleaning agents and solvents are
harmful to plastic parts.
► Some of these include, but are not limited
to: Gasoline, Acetone, Methyl Ethyl Ketone
(MEK), Carbonyl Chloride, cleaning solu­
tions containing Chlorine, Ammonia, and
household cleaners containing Ammonia.
Customer service and repairs must
only be carried out by the manufac­
turer or service workshops. Find the
nearest address at:
www.festoolusa.com/service
Always use original Festool spare
parts. Order no. at:
www.festoolusa.com/service
EKAT
1
2
3
5
4
Observe the following information:
–
Dust-related inspection (e.g. for filter dam­
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– Dispose of components that cannot be
cleaned. Use impermeable bags to do so.
Observe the applicable disposal provisions!
– Keep the contacts on the cordless mobile
dust extractor, charger and battery pack
clean.
15.1 Changing the filter bag
► Open the cordless mobile dust extractor
with T-Loc. Attention: Risk of tilting!
► Changing the filter bag:
▷ Remove the filter bag [8].
▷ Insert a filter bag [9].
► Close the cordless mobile dust extractor
with T-Loc.
An additional filter bag can be stored on
the base of the housing [10].
15.2 Changing the main filter [10]
NOTICE
Damage to the motor
► Never extract material without a main fil­
ter, as this can damage the motor.
► Open the cordless mobile dust extractor
with T-Loc. Attention: Risk of tilting!
► Unlock and fold down lever.
► Remove container upwards.
► Remove the used main filter and replace
with a new one.
► Dispose of the used main filter in accord­
ance with statutory regulations.
► Clean container and seals.
► Insert container. Fold up and lock lever.
► Close the cordless mobile dust extractor
with T-Loc.
Refer to the Festool catalogue for the order
numbers of accessories and tools or find them
online at www.festoolusa.com.
16 Transportation
Observe the following information:
–
Before transportation, always close the T-
Loc at the cordless mobile dust extractor
or connect to the storage box.
– For transportation in vehicles, secure the
cordless mobile dust extractor against slip­
ping and tilting in accordance with the valid
guidelines.
English
16