Festool 576941, Original Instructions Manual

Page: 12 / 18

6 Functional Description
The pictures for the functional description are
on a fold-out page at the beginning of the in­
struction manual. While reading the manual
you can fold out the page for comparison and
quick reference.
6.1
Cordless Mobile Dust Extractor
[1-1]
Cordless mobile dust extractor
[1-2]
Storage box
[1-3]
Extraction sleeve
[1-4]
Suction hose
[1-5]
Handle
[1-6]
T-Loc lock for Systainers
[1-7]
Front handle
[1-8]
Exhaust air opening
[1-9]
Connection button
[1-10] Connection display
[1-11] Suction power adjustment
[1-12] Status display (suction power/warn­
ing signals)
[1-13] MAN button
[1-14] On/off button
[1-15] Remote control CT-F I *
6.2 Remote control CT-F I
[1-16] Connection button
[1-17] LED indicator
[1-18] MAN button (for manually switching
on)
[1-19] Attachment point for the fastening
straps
[1-20] Fastening strap
* Accessories shown or described are not al­
ways included in the scope of delivery.
7 Preparations
After removal from the packaging, the cordless
mobile dust extractor is ready for use.
8 Battery pack
Before using the battery pack, check that the
battery interface is clean. Any contamination of
the battery interface may impair correct contact
and lead to the contacts being damaged.
A faulty contact may result in the machine over­
heating or being damaged.
[2b] Remove the battery pack.
[2a]
klick
Insert the battery pack – until it
clicks into place.
The cordless mobile dust extractor can
only be operated with two battery packs.
Compatible battery packs (see section
5 ).
Further information about the charger and
battery pack with capacity indicator can be
found in the corresponding operating
manual.
9 Commissioning
Standby mode
► Press the on/off button [1-14].
The green LEDs on the status display [1-12] in­
dicate standby mode.
Pressing the on/off button again will switch off
the cordless mobile dust extractor.
Starting/stopping the cordless mobile dust
extractor manually
The cordless mobile dust extractor is in standby
mode.
Directly on the cordless mobile dust extractor:
► Press the MAN button [1-13] to start/stop.
Alternatively, use the connected remote control
CT-F I (see 10.2 ):
► Press the MAN button [1-18] on the remote
control to start/stop.
Starting/stopping the cordless mobile dust ex­
tractor automatically
The cordless mobile dust extractor is in standby
mode.
► To start/stop the cordless mobile dust ex­
tractor automatically: Switch the connected
battery-powered power tool on/off
(see 10.1 ).
English
12