36
Festo — YXCA — 2021-07
Assembly
3. Push the Y-module on the X-Y adapter upwards until the upper profile mounting
2
is in contact
with the stop
1
on the profile of the X-Y adapter.
Align the Y-axis to the X-axis horizontally and without tilting.
Observe clearance A.
EHMX-AS-ELGC-
60
80
EHMY-AS-ELGC-
45
60
Screw size
M5 x 12
Tightening torque
[Nm]
5 ± 10%
Clearance A
between angle profile
X-Y adapter and the
cover of the Y-axis
[mm]
50
Horizontal alignment of
the Y-axis:
Maximum deviation
[°]
± 1
1
2
4. Tighten the 8 screws of the upper and lower profile mounting on the X-Y adapter evenly.
Ä
Check:
–
The upper profile mounting lies against the stop edge of the X-Y adapter.
–
Clearance A is maintained.
–
The horizontal deviation of the Y-axis is max. ± 1°.
