Festo — YXCA — 2021-07
Assembly
35
Mounting X-axis
EHMX-AS-ELGC-
60
80
Screw size
M5 x 12
Tightening torque
[Nm]
6
Tab. 13: EHMX-AS-ELGC with mounting kit: screw size and tightening torque
EHMX-AS-ELGC-
60
80
Screw size
M8 x 40
Tightening torque
[Nm]
25
Tab. 14: EHMX-AS-ELGC with adjusting kit: screw size and tightening torque
•
Tighten all screws for mounting the X-axis on the mounting surface in accordance with the
mounting component.
Apply counter pressure to the adjusting bolts with adjusting kits.
Align Y-module horizontally
Transport may have caused the product to become shifted or distorted.
1. Push the slide of the X-module into the motor-side end position of the X-axis.
2. On the XY-adapter of the X-module: loosen the 8 screws on the upper and lower profile mounting
a maximum of 1 revolution.
Ä
The Y-axis is easily detached.
