1
User instructions
Stepping motor indexer module type SPC200-SMX-1 has been
designed for interfacing a stepping motor to the SPC200 Smart
Positioning Controller. The stepping motor indexer module pro-
vides connections for reference switches and end switches, as
well as as for a stepping motor power controller.
Detailed information on the SPC200, on the stepping motor
indexer module and on electric axes can be found in the user
manual P.BE-SPC200-..., in manual P.BE-SPC200-SMX-1-... as
well as in the operating instructions for the electrical linear axis
type DGE(L)-... .
CAUTION
Pay strict attention to the following instructions shown
therein:
– safety guidelines
– specifications for the use of the individual modules
and components.
More information on electrical positioning systems can be found
in the manual P.BE-ATP-... .
WARNING
Actuators may be activated unintentionally and the SPC200
may be damaged if components are added or removed
when the power supply is switched on. Before undertaking
installation or maintenance work, switch off the following
power supplies in the sequence listed:
1. the compressed air supply
2. all load voltages and operating voltages for the SPC200
and for the connected components of the positioning
system.
E
n
g
lis
h
SPC200-SMX-1
9903NH
11
